Profiles For Sale
Horisontal beams can be tailored to any size yet we have a few standard lengths. Note that the beam usually is attached to a upright pole (ALU-4 or ALU-8) with a beam-lock. The beam can be extended with rod or push-fit extender. Wall thickness is 2mm and the profile is anodized and weather proof.
ALU-8, 40×40 mm (8-sided)
Eight sided pole from where e.g. horizontal beams can connect at every 45 degree angel. Pole can be fitted with M10 thread in one or both ends. Can be extended with rod. Wall thickness is 2mm and the profile is anodized and weather proof. Can be threaded with M10 in one or both ends.
Quarter Corner profile, 28×28 mm (3-grooves)
The ideal profile for creating stylish corners. Can be used with our connecting locks and in any size. A lightweight solution for displays and counters. M10 threads can be added in both ends.
ALU-4, 40×40 mm (4-sided)
Four sided off-set aluminum profile pole that has different usage depending on way used. The sides has 3, 2, 2 and 1 tracks for fastening of beams and extras. As e.g. feet on a counter the profile can be turned so that the feet are ”built in” or ”outside” the square counter top square. You can also build straight surfaces or straight lines (walls) where the pole is bulbing out. All sides always has the center track. Can be threaded with M10 in one or both ends.
Round aluminum tubes. Usually connected with our glass reinforced plastic junctions. Can be extended with TUBE Connector. 30mm diameter tube for very light weight frames and constructions. Can be equipped with M10 size threaded plug in one or both ends.
TUBE 30 mm Junctions
The aluminum pipe constructions are locked together with 2, 3 or 4 way junctions. Just press in the TUBE ends and usually there is a banner locking them toghether. The fully weather proof, glass enforced plastic junctions can also be attached with a metal screw to the pipe.
1 way tip with hole
1 way TUBE foot tip
2 way pipe connector 180 degree
2 way corner 90 degree
2 way little T
2 way big T
3 way corner 90 degree
3 way pyramide junction
Square aluminum tubes. Usually connected with our internal plastic junctions. Can be extended with TUBE Connector. 25mm diameter tube for very light weight frames and constructions. Can be equipped with M10 size threaded plug in one or both ends.
All sizes up to 6000 mm available
Foot (or castor) Options
There is a range of different feet from weight to castors to even floating feet.
Round Foot 400 mm, powder coated black steel
Square Foot 400 mm, galvanized steel
Slim Foot Alu 40×500 mm M10 holes
Slim Foot Alu 40×500 mm M4 double holes
Adjustable foot 40mm M10
Castor M10 70 mm wheel
TUBE Foot 500 mm
TUBE Foot 940 mm (Outdoor)
Tank Foot with water 10l.
Screw Foot for grass and snow (TUBE)
We tailor any kind of add on for your stand. Fastening systems for both ALU rails and TUBE. Just ask!
Powder Coated Black
Both ALU poles can be purchased in power coated black. Often used for MultiStand floor standing equipment.
+358 10 219 35 66